ZyXEL Communications P-2602HWLNI ユーザーズマニュアル

 Chapter 23 Remote Management Configuration

P-2602HWLNI User’s Guide

You can configure your ZyXEL Device for remote Telnet access as shown next. The 
administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.

Figure 196   Telnet Configuration on a TCP/IP Network

Click Advanced > Remote MGMT > Telnet tab to display the screen as shown. 

Access Status Select a ZyXEL Device interface from Access Status on which incoming HTTPS 

access is allowed.
You can allow only secure web configurator access by setting the HTTP Access 

Status field to Disable and setting the HTTPS Access Status field to an 

interface(s).

Secure Client 

IP 

A secure client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your settings back to the ZyXEL Device. 

Cancel

Click Cancel to begin configuring this screen afresh.

Table 138   Remote Management: HTTP