ZyXEL Communications P-2802H(W)(L)-I Series ユーザーズマニュアル

Chapter 21 System

P-2802H(W)(L)-I Series User’s Guide

Figure 177   System General Setup

The following table describes the labels in this screen.  

Table 113   System General Setup

General Setup

System Name

Choose a descriptive name for identification purposes. It is recommended you enter 

your computer’s “Computer name” in this field. This name can be up to 30 

alphanumeric characters long. Spaces are not allowed, but dashes “-” and 

underscores "_" are accepted.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP 

may assign a domain name via DHCP. 
The domain name entered by you is given priority over the ISP assigned domain 

name.

Administrator 

Inactivity Timer

Type how many minutes a management session (either via the web configurator or 

telnet) can be left idle before the session times out. The default is 5 minutes. After it 

times out you have to log in with your password again. Very long idle timeouts may 

have security risks. A value of "0" means a management session never times out, 

no matter how long it has been left idle (not recommended).

Password

Old Password

Type the default password or the existing password you use to access the system in 

this field.

New Password

Type your new system password (up to 30 characters). Note that as you type a 

password, the screen displays a (*) for each character you type. After you change 

the password, use the new password to access the ZyXEL Device.

Retype to 

Confirm

Type the new password again for confirmation.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.