ZyXEL Communications NWA3160 ユーザーズマニュアル

ページ / 314
ZyXEL NWA-3160 Series User’s Guide
157
C
H A P T E R
 
 13 
Rogue AP
This chapter discusses rogue wireless access points (APs) and how to configure the ZyXEL 
Device’s rogue AP detection feature.
"
Rogue AP detection features are available on the NWA-3160 and NWA-3163 
only.
13.1  Rogue AP Introduction
A rogue AP is a wireless access point operating in a network’s coverage area that is not a 
sanctioned part of that network. Rogue APs are not under the control of the network’s 
administrators, and can open up holes in a network’s security. Attackers can take advantage of 
a rogue AP’s weaker (or non-existent) security to gain access to the network, or set up their 
own rogue APs in order to capture information from wireless clients. If a scan reveals a rogue 
AP, you can use commercially-available software to physically locate it.
Note that it is not necessary for a network to have a legitimate wireless LAN component for 
rogue APs to open the network to an attacker. In this case, any AP detected can be classified as 
rogue.
13.2  Rogue AP Examples
In the following example, a corporate network’s security is compromised by a rogue AP (R
set up by an employee at his workstation in order to allow him to connect his notebook 
computer wirelessly (A). The company’s legitimate wireless network (the dashed ellipse B) is 
well-secured, but the rogue AP uses inferior security that is easily broken by an attacker (X
running readily available encryption-cracking software. In this example, the attacker now has 
access to the company network, including sensitive data stored on the file server (C).