ZyXEL Communications vantage cnm ユーザーズマニュアル

Chapter 10 Firmware Management

Vantage CNM User’s Guide

Use this screen to select the firmware you want to upload to Vantage CNM. To open this 
screen, click Add in the Device Operation > Firmware Management > Firmware List 
screen.

You must upload the whole firmware zip file, which contains the following:

• The device firmware (bin file extension). Only this firmware file is actually downloaded 

to the device.

• The device default configuration file (config file extension).

• Device firmware release notes (doc file extension) highlighting.

• Boot module with bm file extension.

• A file with XML file extension. Vantage CNM uses the XML file to gather the device 

type, firmware version and release date information.

Besides, you have to make sure the FTP information has been configurated properly in the 
CNM System Setting > Configuration > Servers > Configuration. See 

.

Figure 124   Device Operation > Firmware Management > Firmware List > Add

Type the file name and path of the firmware zip file, or click Browse to locate it. You may also 
create an alias that appears in the previous screen. Click Apply to load the firmware zip file to 
Vantage CNM. Then, click Device Operation > Firmware Management > Firmware 
Upgrade if you want to upload the firmware to one or more devices. See 

.

Remove

Click to delete a selected firmware from your Vantage CNM firmware 
management.

Total Records

This entry displays the total number of records on the current page of the list.

Table 110   Device Operation > Firmware Management > Firmware List (continued)