Multi-Tech Systems MTS2SA-T ユーザーズマニュアル
Chapter 10
− Modem Mode AT Commands, S-Registers, and Result Codes
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
120
Register Unit Range Default Description
S14
138 (8Ah) General Bit-Mapped Options Status. Indicates the status of
command options.
Bit 0 This bit is ignored.
Bit 1 Command echo (En)
Bit 1 Command echo (En)
0 =
Disabled (E0)
1 =
Enabled (E1) (Default.)
Bit 2 Quiet mode (Qn)
0 =
Send result codes (Q0) (Default.)
1 =
Do not send result codes (Q1)
Bit 3 Result codes (Vn)
0 =
Numeric (V0)
1 =
Verbose (V1) (Default.)
Bit 4 Reserved
Bit 5 Tone (T)/Pulse (P)
Bit 5 Tone (T)/Pulse (P)
0 =
Tone (T) (Default.)
1 =
Pulse (P)
Bit 6 Reserved
Bit 7 Originate/Answer
Bit 7 Originate/Answer
0 =
Answer
1 =
Originate (Default.)
S16
0
Test Mode Bit-Mapped Options Status.
Indicates the test in
progress status.
Bit 0 Local analog loopback
0 =
Disabled (Default.)
1 =
Enabled (&T1)
Bits 1-7
Not used
S19 and S20
Reserved
S21
52 (34h) V.24/General Bit-Mapped Options Status. Indicates the status of
command options.
Bits 0 - 1
Bits 0 - 1
Reserved (0)
Bit 2 CTS behavior (&Rn)
0 =
CTS tracks RTS (&R0)
1 =
CTS always on (&R1) (Default.)
Bits 3-4
DTR behavior (&Dn)
0 =
&D0 selected
1 =
&D1 selected
2 =
&D2 selected (Default.)
3 =
&D3 selected
Bit 5 RLSD (DCD) behavior (&Cn)
0 =
&C0 selected
1 =
&C1 selected (Default.)
Bit 6 DSR behavior (&Sn)
0 =
&S0 selected (Default.)
1 =
&S1 selected
Bit 7 Long space disconnect (Yn)
0 =
Y0 (Default.)
1 =
Y1