Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Chapter 3 – Managing and Configuring the MultiConnect Adapter 

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

 

• 

Use TTY to configure your MultiConnect IP for the first time. Configure the host serial port 
using the defaults listed below: 

Baud: 115.2K 
Data: 8 
Parity: N 
Stop: 1 
Flow-Control: None 

• 

Press the Enter key three times to get to the Login prompt or send three carriage returns. 

• 

At the Login prompt, type admin. 
At the Password prompt, type admin. 

The user name and password are case sensitive. They must be typed in lowercase 

letters. 

• 

Open the PPP interface on the modem port. 

• 

Upon successful establishment of a Telnet session, the MultiConnect IP displays the Login 
prompt. 

At the Login prompt, type admin. 
At the Password prompt, type admin.  

• 

 After a successful login, the MultiConnect IP enters Command Mode. In Command Mode, 
the MultiConnect IP can be configured and managed using the Command Line Interface 
(CLI) command set. 

• 

In Command Mode, a # sign designates the prompt. If you type the word Help at the command 
prompt, a complete list of commands displays. 

• 

If you type the word Usage at the command prompt, a list of the command semantics displays. 

• 

In Data Mode, the # sign is not displayed.  

• 

To leave Command Mode, exit your terminal or Telnet session or type the word Exit at the 
command prompt. 

 See the Restore command and IP Escape String command.