Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Chapter 13 – SMTP Client 

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

 

SMTP Client is used to establish a TCP session on an SMTP server running on port 25.  

SMTP Client supports sending ASCII text or MIME-encoded binary attachment emails with different 
media types and subtypes from the host/serial device through commands to the MultiConnect IP.  

SMTP Client supports the following methods for sending emails:  

• 

To the hosts/email addresses specified in the 

command prompt.

 

• 

To the hosts/email addresses 

. 

• 

To the hosts/email addresses entered in 

. 

 All of these commands are optional. The send-mail command prompts for the details required if 

they are neither given as options nor pre-configured. Various scenarios are covered later in this chapter. 
 

• 

This application is applicable only in the MultiConnect IP in non-transparent mode. 

• 

This application can be used only after the PPP link is UP with an IP Address on the modem 
port. (Refer to Chapter 6 Prerequisite Configurations - Physical Link Established over the Modem 
Port for more details) 

• 

In the event of PPP link DOWN,  the SMTP request triggers PPP link establishment.