Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Chapter 14 – POP3 Client 

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

 

The MultiConnect IP can be configured as a POP3 client to retrieve emails from a POP3 server. The 
POP3 client, available in MultiConnect IP, can do the following: 

• 

List the number of messages and message sizes 

• 

Retrieve the header information of messages 

• 

Retrieve the complete email 

• 

Retrieve the top 'n' lines of a message 

• 

Delete an email on the server 

• 

Retrieve the unique email ID listing 

 

• 

This application is applicable only in the non-transparent mode. 

• 

This application can be used only after the PPP link is UP with an IP Address on the modem 
port. (Refer to Chapter 6 Prerequisite Configurations - Physical Link Established Over the Modem 
Port for more details) 

• 

In the event of PPP link DOWN, the POP3 request triggers PPP link establishment.   

To fulfill the prerequisites for receiving/retrieving emails from the email server, configure the following 
parameters: 

• 

pop3 server name/ip address 
Command: set recv-mail server-name <server-name> 

• 

pop3 port number 
Command: set recv-mail server-port <port-number> 

• 

pop3 account/user name 
Command: set recv-mail mailbox-name <account/user name> 

• 

pop3 account/user password 
Command: set recv-mail mailbox-password <account/user password> 

These commands need to be executed only to set the initial configuration. However, they must be 
executed whenever a parameter is changed. 

Assuming that the POP3 server is 192.168.2.10, POP3 port is 110, account/user name is mtss, and the 
account/user password is mtsspass, execute the following commands to configure the MultiConnect IP 
to retrieve emails.