Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Multi-Tech Systems
  4. MTS2SA-T
  5. ユーザーズマニュアル

Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

ダウンロード
ページ / 181
Chapter 4 – Command Line Interface (CLI) 
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 
44
 
PPP Commands – Setup
 
Command Syntax 
set ppp <interface> local-ip-addr <ipaddr> mask <ipmask> 
Description 
During IPCP negotiations, the configured IP address is sent for the local 
interface. In the case where the peer is requested to provide the IP 
address, it can be configured as 0.0.0.0 
Default Value 
0.0.0.0 
255.255.255.0 
Success 
OK 
Error 
1.  Too few arguments 
    Possible arguments are IP Address and Mask 
2. Invalid IP address/Mask 
Invalid argument     
 
Command Syntax 
set ppp <interface> password <password > 
 
Description 
Sets the password that remote peers will use for authentication. 
Default Value 
Ipmodule 
Success 
OK 
Error 
1. Password Length 
 
Password should have minimum of 8 characters 
 
Command Syntax 
set ppp <interface> remote-ip-addr <ipaddr> mask <ipmask> 
Description 
During IPCP negotiations, this configured IP address is sent for the remote 
interface. In the case of the peer being requested to provide the IP address, 
it can be configured as 0.0.0.0 
Default Value 
0.0.0.0 
255.255.255.0 
Success 
OK 
Error 
1.  Too few arguments 
    Possible arguments are IP Address and Mask 
2.  Invalid IP address/Mask 
     Invalid argument   
 
 
 
Command Syntax 
set ppp <interface> username <username>
 
Description 
Sets the user name that the remote peer will use for authentication.  
Default Value 
Ipmodule 
Success 
OK 
Error 
1.  Too few arguments 
   Possible value(s) are valid user name