Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Chapter 7 – Telnet Dialout  

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

(Return to Scenario 1 - Setup Manual Dialout 

Notes:

) 

(Return to Scenario 2 - Auto Dialout 

Prerequisites

) 

(Return to Scenario 3 - Auto Dial-out in RAW-Mode 

Notes:

) 

 

• 

Enable/Disable the Authentication for Dial-out session 

# set login auto-dialout-login <enable/disable> 

 

• 

Enable/Disable the Switching-between-Dialout & Command Prompt feature 

# set ip telnet escape-monitor <enable/disable> 

• 

Set the Escape-Monitor-String to switch between Dialout and Command Prompt sessions.

 

# set ip telnet escape-string "+++inet" 

• 

Enable/Disable the RAW mode globally for all Dial-out sessions. 

# set ip telnet raw-mode <enable/disable> 

• 

Enable/Disable the RAW mode for the serial port S0. 

# set serial s0 raw-dialout <enable/disable>

 

• 

Set the Baud rate for the serial port S0 to be taken for a Dialout session. 

# set serial s0 baud-rate <Baud-rate>  

• 

Set the Flow control for the serial port S0 to be taken for a Dialout session. 

# set serial s0 flow-control <rts-cts/none> 

• 

Set the Parity for the serial port S0 to be taken for a Dialout session. 

# set serial s0 parity <even/odd/none> 

• 

Set the Data bits for the serial port S0 to be taken for a Dialout session. 

# set serial s0 data-bits <7/8>

 

• 

Set the Stop bits for the serial port S0 to be taken for a Dialout session. 

# set serial s0 stop-bits <1/1.5/2> 

• 

Set the Flow control for the serial port S1 to be taken for a PPP session 

# set serial s1 flow-control <rts-cts/none> 

• 

Set the Parity for the serial port S1 to be taken for a PPP session 

# set serial s1 parity <even/odd/none> 

• 

Set the Data bits for the serial port S1 to be taken for a PPP session 

# set serial s1 data-bits <7/8> 

• 

Set the Stop bits for the serial port S1 to be taken for a PPP session 

# set serial s1 stop-bits <1/1.5/2>