ZyXEL Communications 314 PLUS ユーザーズマニュアル

ページ / 225
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 
NAT 
4-15 
Step 2. 
Enter 2 to go to Menu 15.2 - NAT Server Setup
Step 3. 
Enter a port number in an unused Start Port No field. To forward only one port, enter it again in 
the End Port No field. To specify a range of ports, enter the last port to be forwarded in the End 
Port No
 field.  
Step 4. 
Enter the inside IP address of the server in the IP Address field. In the following figure, you have 
a computer acting as an FTP, Telnet and SMTP server (ports 21, 23 and 25) at 192.168.1.33. 
Step 5. 
Press [ENTER] at the “Press ENTER to confirm …” prompt to save your configuration after you 
define all the servers or press [ESC] at any time to cancel. 
 
Figure 4-10 Menu 15.2 — NAT Server Setup 
             Menu 15.2 - NAT Server Setup 
 
 
        Rule  Start Port No.  End Port No.  IP Address 
       --------------------------------------------------- 
         1.  Default     Default    0.0.0.0 
         2.   0        0      0.0.0.0 
         3.   0        0      0.0.0.0 
         4.   0        0      0.0.0.0 
         5.   0        0      0.0.0.0 
         6.   0        0      0.0.0.0 
         7.   0        0      0.0.0.0 
         8.   0        0      0.0.0.0 
         9.   0        0      0.0.0.0 
        10.   0        0      0.0.0.0 
        11.   0        0      0.0.0.0 
        12.   1026       1026     RR Reserved 
 
          Press ENTER to Confirm or ESC to Cancel: