ZyXEL Communications 794M ユーザーズマニュアル

Prestige 794M User’s Guide

Chapter 2 The Web Configurator 

30

The following table describes the labels in this screen. 

The routing table contains the route information to the network(s) that the Prestige can reach. 
The Prestige automatically updates the routing table with the RIP information received from 
other Ethernet devices.  

Click Status and Routing Table in the navigation panel to display the Routing Table screen. 

Figure 10   Status: Routing Table 

The following table describes the labels in this screen. 

Table 4   Status: ARP Table

IP Address

This is the learned IP address of a device connected to a switch port with 

corresponding MAC address below.

MAC Address

This is the MAC address of the device with corresponding IP address above.

Interface

This is the interface name on the Prestige to which a device is connected. 

Static

This shows whether the MAC address is dynamic (learned by the Prestige) or 

static (manually entered). 

Table 5   Status: Routing Table 

Routing Table

Valid

This field indicates whether a routing status is successful. 

Destination

This field displays the IP address of a destination network.

Netmask

This field displays the subnet mask of a destination network. 

Gateway/Interface

This field displays the IP address of a gateway or the interface name on the 

Prestige this route uses. 

Cost

This field displays the cost (or hope count) for this route. 

RIP Routing Table

Destination

This field displays the IP address of a destination network.

Netmask

This field displays the subnet mask of a destination network.