Multi-Tech Systems MT3334HD8 ユーザーズマニュアル

CommPlete Communications Server

The MT3334HD8’s firmware is contained in a flash PROM. At various times, Multi-Tech may add
enhancements and/or fixes to this firmware. The flash technology used in the MT3334HD8 allows these
upgrades to be loaded directly into the PROM chip through the modem’s serial port, or through the
backplane when using the management software.

Please refer to the MultiModemManager software manual for instructions on how to update a modem’s
firmware using the management software.

  1.  Download FLASHPRO.ZIP and a new .HEX file from the Multi-Tech BBS.

  2.  Unzip the FLASHPRO.ZIP file. Place this unzipped file and the .HEX file in the same directory.

  3.  Run FlashPro by typing flashpro and pressing E

NTER 

 at the DOS prompt.

  4.  Highlight the Configure option in the Main Menu, and press E

NTER

. Highlight Active Port and

select the COM port to which the MT3334HD8 is attached. Highlight Baud Rate and select the rate
you want to program at. Press E

SC

 when finished.

  5.  Highlight the Select File to Program option in the Main Menu. Highlight the .HEX file. Hit E

SC

when finished.

  6.  Highlight the Program Firmware option in the Main Menu. You are prompted to confirm the file

to program.

  7.  Return to step 3, if you have not successfully programmed FlashPro, or call Multi-Tech's Technical

Support or BBS.