Multi-Tech Systems MTS2SA-T-R ユーザーズマニュアル
Chapter 10
− Modem Mode AT Commands, S-Registers, and Result Codes
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
127
Result Codes
The modem responds to commands from the DTE and to activity on the line by signaling to the DTE in the form of
result codes.
Two forms of each result code are available:
result codes.
Two forms of each result code are available:
•
Short-form – a data-like numeric response (included in parentheses following the long-form). The short-form
is terminated by < CR> only with no preceding sequence.
is terminated by < CR> only with no preceding sequence.
•
Long-form – a "verbose" response, preceded and terminated by the sequence < CR> < LF>.
If result messages are suppressed, nothing is returned to the DTE.
The long-form result codes can be modified by the OEM through the .INF file.
The Verbose response may differ in some instances. Some modems may use V.90 terminology and some may use
V.92 terminology; however, the meaning of the message is the same:
The long-form result codes can be modified by the OEM through the .INF file.
The Verbose response may differ in some instances. Some modems may use V.90 terminology and some may use
V.92 terminology; however, the meaning of the message is the same:
V.92 Terminology
V.90 Terminology
+MRR Carrier
+DR Compression
+ER Protocol
+MCR Connect
+DR Compression
+ER Protocol
+MCR Connect
Note:
An asterisk (*) in the Short Form column means that this Result Code is not active in V.22bis modems.
Table of Result Codes
Short
Form
Form
Long Form
Description
+F4 *
+FCERROR
Fax data speed.
High speed fax data (V.27, V.29, V.33, or V.17) is expected but a V.21
signan6 lcegn