3M Hot Melt Fibre Optic ユーザーズマニュアル
FEATURES AND BENEFITS
3M™ HOT MELT CONNECTORS – LC, ST, SC, FC
Meets ISO 11801, EN 50173 and EIA/TIA 568-B.3 standards for indoor
and outdoor applications
and outdoor applications
Long term reliability
Ease of use on backbone and horizontal cable
Quick termination in <2 minutes; high yield
Allows custom length cable assemblies to be built on site
Enhances cable management in telecom room or central office
Minimizes cable slack
Adhesive fibre retention
Not dependent on mechanical retention alone
3M field polishing process produces <55dB reflection, singlemode
Reliable in high speed transmission
Pre-loaded adhesive
No epoxy mixing or mess; no shelf life
Re-heatable adhesive
Allows fibre repositioning
Blue dot of adhesive
Easy to see when polishing is complete
FEATURES AND BENEFITS
SPECIFICATIONS
MULTIMODE
SINGLEMODE
Product Number
6100 ST Series
6200 FC Series
6300 SC Series
6600 LC Series
8100 ST Series
8200 FC Series
8300 SC Series
8600 LC Series
Testing Specification
ISO 11801, EN 50173 and EIA/TIA 568-B.3
Operating Temperature*
-10°C to +60°C
Attenuation**
<0.2dB typical
Reflection***
-25dB typical
-55dB typical
Mating Durability 300 Matings
<0.2dB change
Storage Temperature
-40°C to +85°C
Materials and Identification
Ferrule
Zirconia ceramic
Housing Body
Nickel plated zinc (ST)
Engineered resin (LC, SC, FC)
Boot
Thermoplastic elastomer
Flame Retardancy
UL-94 V-0
Adhesive
Blue dot on ferrule
*Multimode connectors tested at 850nm and 1300nm.
**Singlemode connectors tested at 1310nm and 1550nm.
***Tested for 96 hours at 85°C, exceeding IEC standards.
**Singlemode connectors tested at 1310nm and 1550nm.
***Tested for 96 hours at 85°C, exceeding IEC standards.