Abocom None ユーザーズマニュアル

 

- 

 

Check the box to enable Wi-Fi Multi-Media function that is meant to 
improve audio, video and voice applications transmitted over Wi-Fi. 

Select a power save mode that preferred. 

z 

AC_BK (Access Category Background) 

z 

AC_BE (Access Category Best Effort) 

z 

AC_VI (Access Category Video) 

z 

AC_VO (Access Category Voice) 

Check the box to enable Direct Link Setup (DLS). This function will be 
enabled under the connection with AP which must support the DLS function. 
Direct Link Setup allows direct STA-to-STA frame transfer within a BSS 
(B

asic Service Set

). This is designed for consumer use, where STA-to-STA 

transfer is more commonly used. 

The setting of DLS( Direct Link Setup) indicates as follow : 

Fill in the blanks of Direct Link with MAC Address of target STA, and the 
STA must conform to two conditions: 

z 

Connecting with the same AP that supports DLS feature. 

z 

DLS enabled. 

Timeout Value represents that it disconnect automatically after few seconds. 
The value is integer that must be between 0~65535. It represents that it 
always connects if the value is zero. (Default setting of Timeout Value is 60 
seconds.) 

Click this button to apply the settings. 

Select a direct link STA MAC address, then click "Tear Down" button to 
disconnect the STA. 

 

WPS 

The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security 

setup and management of Wi-Fi networks. The STA as an Enrollee or external Registrar supports the 

configuration setup using PIN (Personal Identification Number) configuration method or PBC (Push 

Button Configuration) method through an internal or external Registrar.