Abocom None ユーザーズマニュアル
-
31 -
No forwarding
among wireless
clients
among wireless
clients
No beacon among wireless client, clients can share information each
other. (The system default is no forwarding.)
other. (The system default is no forwarding.)
Hide SSID
Do not display AP name. (System default is disabled.)
Allow BW 40MHz
Click to disable this function. (System default is enabled.)
This function enables the adapter to deliver better throughput, enable this
function the link speed will up to 300Mbps, disable this function the link
speed will up to 150Mbps only.
This function enables the adapter to deliver better throughput, enable this
function the link speed will up to 300Mbps, disable this function the link
speed will up to 150Mbps only.
Note: This function depends on the capability of device. Here
supports link speed up to 150Mbps only, DO NOT
support link speed up to 300Mbps.
support link speed up to 300Mbps.
Tx BURST
This function enables the adapter to deliver better throughput during a
period, it only takes effect when connecting with the AP that supports this
function. (Default setting is enabled.)
period, it only takes effect when connecting with the AP that supports this
function. (Default setting is enabled.)
Default
Use the system default value.
Apply
Click to apply the above settings.
Access Control