Addonics Technologies ADZIFCF プリント

 
 
 

 

 
 
Locking Mechanism on ZIF Connector 
 
Open Position: 

 

The locking mechanism on the ZIF connector is in the open 
position if the latch faces vertical. 
 
Close Position: 

 

 
The locking mechanism on the ZIF connector is in the close 
position if the latch faces horizontal. 
 
 
Note: Instructions can be found on the FAQ section. 
 
 

 
 
 
1.  Insert the desired Compact Flash into the Addonics 1.8" 

ZIF - CF Adapter (ADZIFCF). The Compact Flash 
should be keyed to prevent the card from being 
incorrectly inserted. 

 

 
2. 

Put the mechanism in the open position and slide the 
flat ribbon cable into the ZIF connector on the adapter. 

 
3. 

Close the latch to secure the ribbon cable connection. 

 
 
1.8” ZIF- CF adapter shown below attached to a 1.8” ZIF 
to 2.5” IDE converter 

 

 

 

 

 
Email: 

 

http://www.addonics.com/sales/query/ 

Internet:  

http://www.addonics.com 

 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 433-3855 
Email: 

http://www.addonics.com/support/query/ 

 
 

Pin 1 

Power and 
Drive Activity 
LED 

ZIF connector 

Pin 1 

Latch 

CF Slot 

Latch 

Latch