Addonics Technologies NASU2 ユーザーズマニュアル
Addonics
T E C H N O L O G I E S
NAS Adapter
Model: NASU2
User Manual
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B digital
device pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause har mful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on and off, the user
is encouraged to try and correct the interference by one or more of the following
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the one where receiver is
connected
Consult a certified television or radio technician
This equipment has been tested and found to comply with the limits for a class B digital
device pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause har mful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on and off, the user
is encouraged to try and correct the interference by one or more of the following
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the one where receiver is
connected
Consult a certified television or radio technician
1.0
Key Features
•
Convert any USB 2.0 / 1.1 mass storage device into a Network Attached
Storage device
Storage device
•
Great for adding Addonics Storage Tower, Storage Rack or any
Addonics USB storage device onto the network
Addonics USB storage device onto the network
•
USB port can be use to power most 2.5" USB hard drive or any low
power USB devices
power USB devices
•
Connect a USB printer to share it over the network
•
One Fast Ethernet 10/100Mbps port
•
Can be set as a DHCP server or client depending on whether a DHCP
server is present
server is present
•
Support Samba server, by which the server hosts 64 clients on line
•
Support FTP server allowing up to 8 FTP users at the same time
•
Built-in Bit torrent client to download files directly off the internet onto
the attached USB storage device
the attached USB storage device
•
UPnP AV server can be used to share photo/music files stored on the
file server with XBOX 360 video game consoles connected to the LAN
file server with XBOX 360 video game consoles connected to the LAN
•
Supports USB 2.0 / 1.1 specification.
•
User Management capability to allow read only or read/write access to
folders
folders
•
Administrative management access via web browser with password
security.
security.
•
Compatible with Windows 2000/XP/Vista, Mac 10.5.4 and above, and
Linux 2.6.x and above
Linux 2.6.x and above
The NAS adapter is a flexible, economical and powerful unit for your Network.
Follow the instructions to help you connect, setup, and configure it.
Note: Any external USB storage device that you connect to the NAS
adapter must be first initialized and formatted. This means that if
you are connecting an external USB drive with data on it, you will
need to make a backup of this data and transfer them back to the
USB drive after the drive finishes the formatting by the NAS
adapter.
you are connecting an external USB drive with data on it, you will
need to make a backup of this data and transfer them back to the
USB drive after the drive finishes the formatting by the NAS
adapter.