D-Link DAP-1350 ユーザーズマニュアル
D-Link DAP-1350 User Manual
Section 3 - Configuration
LAN Setup
This section will allow you to change the local network settings of the access point and to configure the DHCP
settings.
settings.
LAN Connection
Type:
Device Name:
Use the drop-down menu to select Dynamic IP
(DHCP) to automatically obtain an IP address
on the LAN/private network.
(DHCP) to automatically obtain an IP address
on the LAN/private network.
Enter the Device Name of the AP. It is
recommended to change the Device Name if
there is more than one D-Link device within
the subnet.
recommended to change the Device Name if
there is more than one D-Link device within
the subnet.