D-Link DAP-1350 ユーザーズマニュアル
5
D-Link DAP-1350 User Manual
Section 3 - Configuration
Advanced Wireless
Transmit Power:
RTS Threshold:
Fragmentation
Threshold:
Short GI:
Sets the transmit power of the antennas.
Note: Transmit power is regulated by international
standard. Users are forbidden to change its
maximum limit.
standard. Users are forbidden to change its
maximum limit.
This value should remain at its default setting of
2346. If inconsistent data flow is a problem, only
a minor modification should be made.
2346. If inconsistent data flow is a problem, only
a minor modification should be made.
The fragmentation threshold, which is specified
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
Check this box to reduce the guard interval time
therefore increasing the data capacity. However,
it’s less reliable and may create higher data
loss.
therefore increasing the data capacity. However,
it’s less reliable and may create higher data
loss.