D-Link DAP-1350 ユーザーズマニュアル
D-Link DAP-1350 User Manual
Section 3 - Configuration
Set the transmit power of the antennas.
Note: Transmit power is regulated by international
standard. Users are forbidden to change its
maximum limit.
standard. Users are forbidden to change its
maximum limit.
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
(Delivery Traffic Indication Message) 1 is the default
setting. A DTIM is a countdown informing clients
of the next window for listening to broadcast and
multicast messages.
setting. A DTIM is a countdown informing clients
of the next window for listening to broadcast and
multicast messages.
This value should remain at its default setting of
2346. If inconsistent data flow is a problem, only a
minor modification should be made.
2346. If inconsistent data flow is a problem, only a
minor modification should be made.
The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding
the 2346 byte setting will be fragmented before transmission. 2346 is the default setting.
the 2346 byte setting will be fragmented before transmission. 2346 is the default setting.
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless
clients.
clients.
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may
create higher data loss.
create higher data loss.
Transmit Power:
Beacon Period:
DTIM Interval:
RTS Threshold:
Fragmentation
Threshold:
WMM Function:
Short GI:
Advanced Wireless Settings