Diamond Audio Technology DSL642WLG ユーザーズマニュアル
Advanced Features
77
Local LAN
Local LAN
This identifies which PCs on your LAN are covered by this policy.
For each selection, data must be provided as follows:
• Single address
For each selection, data must be provided as follows:
• Single address
Enter an IP address in the "IP address" field. Typically, this set-
ting is used when you wish to make a single Server on your LAN
available to remote users.
ting is used when you wish to make a single Server on your LAN
available to remote users.
• Subnet address
Enter an IP address in the "IP address" field, and the desired
network mask in the "Subnet Mask" field.
network mask in the "Subnet Mask" field.
The remote VPN endpoint must have these IP addresses entered as its
"Remote" addresses.
"Remote" addresses.
Remote LAN
Remote LAN
This identifies which PCs on the remote LAN are covered by this
policy. For each selection, data must be provided as follows:
• Single PC - no subnet
policy. For each selection, data must be provided as follows:
• Single PC - no subnet
Select this option if there is no LAN (only a single PC) at the re-
mote endpoint. If this option is selected, no additional data is
required.
mote endpoint. If this option is selected, no additional data is
required.
• Single address
Enter an IP address in the "IP address" field. This must be an ad-
dress on the remote LAN. Typically, this setting is used when
you wish to access a server on the remote LAN.
dress on the remote LAN. Typically, this setting is used when
you wish to access a server on the remote LAN.
• Subnet address
Enter an IP address in the "IP address" field, and the desired
network mask in the "Subnet Mask" field.
network mask in the "Subnet Mask" field.
The remote VPN endpoint must have these IP addresses entered as its
"Local" addresses.
"Local" addresses.
ESP Configuration
SPI
Enter the required SPIs. Each policy must have unique SPIs. These
settings must match the remote VPN endpoint. Note that the "in"
setting here must match the "out" setting on the remote VPN end-
point, and the "out" setting here must match the "in" setting on the
remote VPN endpoint.
settings must match the remote VPN endpoint. Note that the "in"
setting here must match the "out" setting on the remote VPN end-
point, and the "out" setting here must match the "in" setting on the
remote VPN endpoint.
Encryption
Select the desired Encryption Algorithm, and enter the key in the field
provided.
• For DES, the key should be 8 ASCII characters (16 Hex charac-
provided.
• For DES, the key should be 8 ASCII characters (16 Hex charac-
ters).
• For 3DES, the key should be 24 ASCII characters (48 Hex
characters).
Authentication
Select the desired Authentication Algorithm, and enter the key in the
field provided.
• For MD5, the key should be 16 ASCII characters (32 Hex
field provided.
• For MD5, the key should be 16 ASCII characters (32 Hex
characters).
• For SHA-1, the key should be 20 ASCII (40 Hex characters).