Linksys WAP610N ユーザーズマニュアル

Before upgrading the firmware, download the Access Point’s 
firmware upgrade file from www.linksysbycisco.com.

Click 

Browse and select the firmware upgrade file. Then click 
Start to Upgrade and follow the on-screen instructions.

 

  The  firmware  upgrade  must  not 

be interrupted; do not reboot or power off the 
Access Point during the firmware upgrade..

The Access Point’s current status information is displayed.

Status > Access Point

The  Access  Point’s  current  firmware 

version is displayed.

The Access Point’s MAC Address, as 

seen on your local, wired Ethernet network, is displayed.

The Access Point’s IP Address, as 

seen on your local network, is displayed.

The Subnet Mask configured for your local 

network is displayed.

The  Default  Gateway  configured  for 

your local network is displayed.

Information about your wireless network is displayed.

Status > Wireless Network

The  Access  Point’s  MAC  Address,  as  seen 

on your local, wireless network, is displayed.

The  wireless  mode  used  by  the  network  is 

displayed.

The  wireless  network  name  or 

SSID is displayed.

The radio band used the Access Point is 

displayed.

The  channel  width  setting,  in  MHz,  is 

displayed.

Depending  on  the  channel  settings  of 

your Access Point, the Wide Channel is displayed.

The  Standard  Channel  setting  is 

displayed.

The security method used by the Access Point 

is displayed.

The status of SSID broadcast (enabled or 

disabled) is displayed.

Information about the browser-based utility is displayed.

Status > About

The web server of the browser-based utility 

is displayed.