Linksys WAP54G プリント

A Division of Cisco Systems, Inc.

®

Model No.

Quick Installation

Model No.

• Wireless-G Access Point
• Detachable Antennas
• Power Adapter
• Setup CD with User Guide
• Ethernet Network Cable
• Quick Installation
• Registration Card

1

A

Locate an optimum location 

for the Access Point. The best 

place for the Access Point is 

usually at the center of your 

wireless network, with line of 

sight to all of your PCs and 

wireless accessories.

B

Fix the direction of the 

antenna. Try to place it in a 

position that will best cover 

your wireless network. Nor-

mally, the higher you place the 

antenna, the better the perfor-

mance will be. The antenna's 

position enhances the receiv-

ing sensitivity.

C

Connect a standard Ethernet 

network cable to the Access 

Point. Then, connect the other 

end of the Ethernet cable to a 

switch or router. The Access 

Point will then be connected to 

your 10/100 Network.

D

Connect the AC Power 

Adapter to the Access Point's 

Power Socket. Only use the 

power adapter supplied with 

the Access Point. Use of a dif-

ferent adapter may result in 

product damage.

2

C

The next screen displayed dis-

plays how the Access Point 

should be connected while 

running this Setup Wizard. Opti-

mally, you should perform this 

setup through a PC on your 

wired network. Click the Next 

button to continue the Setup 

Wizard.

D

The Setup Wizard will run a 

search for the Access Point 

within your network and then 

display a list along with the sta-

tus information for each 

access point. If this is the only 

access point on your network, it 

will be the only one displayed. 

If there are more than one dis-

played, select the Access Point 

by clicking on it and click the 
Yes button to continue the 

Setup Wizard.

E

You will be asked to sign onto 

the Access Point you've 

selected. Enter the Password 

you've assigned. If none has 

been assigned, enter the 

default password: admin. 

Then, click the OK button. (This 

password can be changed 

from the Web-based Utility's 

Password tab.)

B

C

Now that you've connected the 

Access Point to your wired network, 

you are ready to begin setting it up. 

This Setup Wizard will take you 

through all the steps necessary to 

configure the Access Point.

A

Insert the Setup Wizard CD into 

your PC's CD-ROM drive. Your 

PC must be on your wired net-

work to set up the Access Point.

B

The Setup Wizard's Welcome 

screen should appear on your 

monitor. If it does not, this 

means the Setup Wizard is not 

automatically running as it 

should. Start the Setup Wizard 

manually by clicking the Start 

button, selecting Run, and typ-

ing d:\setup.exe (where "D" is 

your PC's CD-ROM drive). Click 

the Setup button to continue 

this Setup Wizard. Clicking 

Install Linksys Wireless Guard 
Client installs the client soft-

ware, and the User Guide but-

ton opened this Guide. To exit 

this Setup Wizard, click the Exit 

button.

D

GHz

2.4

E