Lucent Technologies PortMaster ユーザーズマニュアル

If you set PAP to off, and CHAP to on, dial-in users are asked to authenticate with 
CHAP. PAP authentication is neither requested nor accepted. If you set both PAP and 
CHAP to off, dial-in users must authenticate with a username/password login.

To set PAP authentication, use the following command:

Command> set pap on|off

To set CHAP authentication, use the following command:

Command> set chap on|off

You can enable services without authenticating the user at the point of entry on 
PortMaster products that support PRI or in-band signaling. To enable the call-check 
feature in the ComOS, you must first configure call-check user entries on the RADIUS 
server. 

To enable call checking on the PortMaster, use the following command:

Command> set call-check on|off

Note – The call-check feature is off by default.

For more information about enabling RADIUS call checking, refer to the ComOS 3.8 
Release Notes.

You can configure the switch provisioning for ISDN PRI and BRI connections to 
PortMaster ISDN ports. See Chapter 11, “Configuring the PortMaster 3,” for details on 
PRI connections. See Chapter 12, “Using ISDN BRI,” for details on BRI connections.

✍