Motorola VT2142 ユーザーズマニュアル
VT2142 Voice Gateway User Guide
18
PPTP Settings
If you are connecting to a virtual private network (
), obtain the appropriate Point-to-Point Tunneling Protocol
) settings from your VPN administrator. The PPTP settings are:
Enable
Enables PPTP on your VT2142
Username
Type the user name for the PPTP connection
Password
Type the password for the PPTP connection
Server IP
Sets the IP address of the server for the VPN, in
MPPC
Enables Microsoft Point-To-Point Compression (
MPPE
Choose one of the following for Microsoft Point-to-Point Encryption (
•
No
— MPPE is disabled (the default)
•
Required
— MPPE is always enabled on your VT2142
•
Optional
— If your VPN server requires MPPE, it is enabled on your VT2142; if your VPN
server does not require MPPE. it is disabled
If MPPE is enabled, the Strength and Stateless fields are enabled. We recommend not
changing these settings unless directed to by Vonage or your VPN administrator.
changing these settings unless directed to by Vonage or your VPN administrator.
Strength
If MPPE is enabled, sets the encryption strength on the VT2142. All three strengths — 40-bit,
56-bit, and 128-bit (highest) — are selected by default. The most powerful encryption agreed
on by the VPN server and the VT2142 is used.
Stateless
If selected, MPPE stateless encryption is used. If not selected, stateful encryption is used. The
default is selected.
Authentication
You can choose:
•
Auto
— The authentification method is chosen by the VPN server and the VT2142
•
CHAP
— Challenge Handshake Authentication Protocol
•
PAP
— Password Authentication Protocol
•
MSCHAP
— Microsoft Challenge Handshake Authentication Protocol
•
MSCHAP-v2
— Microsoft Challenge Handshake Authentication Protocol version 2
Debug
If selected, the PPTP client displays additional debugging information.