Motorola PTP 600 Series ユーザーズマニュアル

 

 

134

8.3.10.3 SNMP Configuration 

SNMP State: The SNMP state attribute controls the creation of the SNMP features. Changing 

the SNMP state attribute requires a mandatory reboot of the unit. Only when the SNMP state 

is enabled at system start-up will the SNMP processor task be created. 

SNMP Enabled Traps: The SNMP Enabled Traps attribute controls which SNMP Traps the 

unit will send. 

SNMP Community String: The SNMP community string acts like a password between the 

networks SNMP management entity and the distributed SNMP clients (600 Series bridge). 

Only if the community string is configured correctly on all SNMP entities can the flow of 

management information take place. By convention the default value is set to ‘public’. When 

the community string is changed the system requires a mandatory reboot before the new 

string or phrase is adopted. 

SNMP Port Number: Is the port the SNMP management agent is listening to for commands 

from an SNMP manager. The default value for this port number is 161. 

SNMP Trap IP Address: Is the address of either the network SNMP manager or Trap 

receiver. When asynchronous events (Traps in SNMP terminology) are generated, the client 

unicasts these to this IP Address. When the address is changed the system requires a 

mandatory reboot before the setting is adopted 

SNMP Trap Port Number: The SNMP Trap Port Number is the port number of either the 

networked SNMP manager or Trap receiver.  By convention the default value for the port 

number is 162. When the port number is changed the system requires a mandatory reboot 

before the setting is adopted. 

WiMAX Control: Enables and Disables the WiMAX (802.16) MIB. This control is only 

displayed when ‘Fixed Frequency’ is selected during installation. 

8.3.10.4  SMTP (Simple Mail Transport Protocol) 

The SMTP client is an alternative method for the 600 Series bridge to alert a system 

administrator when there are or have been system errors 

SMTP Email Alert: This attribute controls the activation of the SMTP client. 

SMTP Enabled Messages: The SMTP Enabled Messages attribute controls which email 

alerts the unit will send. 

SMTP IP Address: The IP address of the networked SMTP server.