Motorola PRM240 i ユーザーズマニュアル

ページ / 36
Care & Maintenance ____________________________________________ PRM240i Wireless Modem User Manual 
Motorola 22 
68P80802E60-O 
Using Your PRM240i Modem 
Switching the Modem On/Off 
The non-rugged PRM240i modem does not contain a manual on/off 
power switch. The modem is automatically powered on/off when the 
iPAQ Pocket PC is inserted and removed respectively. 
Before operating your non-rugged PRM240i modem ensure the battery 
is fully charged, Modem Info software has been installed on the iPAQ 
and the iPAQ is inserted into the modem, as described earlier. 
Upon first iPAQ insertion the modem Power/On-Line indicator should 
display slow flashing green (once per second) as the modem searches 
for a network connection. As soon as the modem is registered the 
Power/On-Line indicator will fully illuminate. If network access is 
denied or no network can be found the Power/On-Line indication will 
continue to search to flash until it can register somewhere. On 
subsequent insertions the Power/On-Line indicator will reflect the 
power mode state set in the Modem Info application (refer to page 25). 
If the Low Battery display starts flashing red, the battery needs 
charging. See the previous section, Charging the Modem Battery on 
page 21, for further information. 
The iPAQ and non-rugged PRM240i modem is now ready for use. 
Using the Modem Info Application 
Modem Info is a graphical user interface modem diagnostic and 
information tool to enable you to: 
 
Check the network connection status and modem parameters  
 
Check the modem hardware and battery status  
 
Set the various operating modes of the modem 
 
Send and Receive short text messages 
 
Register third party applications for invocation on specific 
modem events 
Modem Info consisting of a single screen with six tabs. These tabs are 
described in the following sub-sections. 
To access ModemInfo, select the ModemInfo application from the 
main screen. By default the Setup tab is displayed.