Motorola 505788-006-00 ユーザーズマニュアル
43
43
SB5100 Series Cable Modem User Guide
X
Print
Exit
Cannot send or receive data
Check the lights on the front panel. Note the first light from top to bottom that is off. This light indicates where
the error occurred as described in
the error occurred as described in
If all lights are off except the Standby light, the cable modem is in Standby mode. Press the Standby button to
reconnect your Internet service.
reconnect your Internet service.
If you have cable TV, check that your TV is working and the picture is clear. If you cannot receive your regular
TV channels, your data service will not function.
TV channels, your data service will not function.
Check the coaxial cable at the cable modem and wall outlet. Hand-tighten if necessary.
Check the IP address. Follow the steps in
on page 38. Call your cable
service provider if you need an IP address.
Check that the USB or Ethernet cable is properly connected to the
cable modem
and your computer.
Problems related to unsuccessful
USB driver installation
USB driver installation
Remove the USB driver. Follow the instructions in one of:
•
•
•
Problem
Possible Solutions