Motorola 3352N ユーザーズマニュアル

You can configure a UNIX-compatible syslog client to repor t a number of subsets of the events entered in 
the Gateway’s WAN Event Histor y. Syslog sends log-messages to a host that you specify.

To enable syslog logging, click on the 

 link.

Check the 

Syslog checkbox. 

The screen expands.

•

Syslog: Enable syslog logging in the system.

•

Syslog Host Name/IP Address: Enter the name or the IP Address of the host that should receive sys-
log messages.

•

Facility: From the pull-down menu, select the Syslog facility to be used by the router when generating 
syslog messages. Options are local0 through local7.

•

Log Violations: If you check this checkbox, the Gateway will generate messages whenever a packet is 
discarded because it violates the router's security policy.

•

Log Access Attempts: If you check this checkbox, the Gateway will generate messages whenever a 
packet attempts to access the router or tries to pass through the router. This option is disabled by 
default.

•

Log Accepted Packets: If you check this checkbox, the Gateway will generate messages whenever a 
packet accesses the router or passes through the router. This option is disabled by default.

☛  

Syslog needs to be enabled to comply with logging requirements mentioned in The Modular 
Firewall Cer tification Criteria - Baseline Module - version 4.1 (specified by ICSA Labs). 
For more information, please go to the following URL:

http://www.icsalabs.com/icsa/docs/html/communities/firewalls/pdf/4.1/baseline.pdf