Netgear WGR614v7 ユーザーズマニュアル

2-2

Introduction

•

Flash memory for firmware upgrades.

The wireless router includes an 802.11g wireless access point, providing continuous, high-speed 
54 Mbps access between your wireless and Ethernet devices. The access point provides:

•

802.11g wireless networking at up to 54 Mbps.

•

802.11g wireless networking, with the ability to operate in 802.11g-only, 802.11b-only, or 
802.11g and b modes, providing backwards compatibility with 802.11b devices or dedicating 
the wireless network to the higher bandwidth 802.11g devices.

•

64-bit and 128-bit WEP encryption security.

•

WEP keys can be generated manually or by passphrase.

•

WPA-PSK support. Support for Wi-Fi Protected Access (WPA) data encryption which 
provides strong data encryption and authentication based on a pre-shared key.

•

Wireless access can be restricted by MAC address.

•

Wireless network name broadcast can be turned off so that only devices that have the network 
name (SSID) can connect.

Unlike simple Internet sharing NAT routers, the WGR614v7 is a true firewall, using stateful 
packet inspection to defend against hacker attacks. Its firewall features include:

•

Denial of Service (DoS) protection.

Automatically detects and thwarts DoS attacks such as Ping of Death, SYN Flood, LAND 
Attack, and IP Spoofing.

•

Blocks unwanted traffic from the Internet to your LAN.

•

Blocks access from your LAN to Internet locations or services that you specify as off-limits.

•

Logs security incidents.

The WGR614v7 will log security events such as blocked incoming traffic, port scans, attacks, 
and administrator logins. You can configure the router to E-mail the log to you at specified 
intervals. You can also configure the router to send immediate alert messages to your E-mail 
address or E-mail pager whenever a significant event occurs.