Netgear WNDR3400 ユーザーズマニュアル

Safeguarding Your Network

2-10

To set up wireless security, you can either manually configure it in the Wireless Settings screen, or 
you can use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/
WPA2 security (see 

Both WPA and WPA2 provide strong data security. WPA with TKIP is a software implementation 
that can be used on Windows systems with Service Pack 2 or later. NETGEAR recommends using 
WPA2 with AES, which provides the strongest security. WPA2 with AES is a hardware 
implementation; see your device documentation before implementing it. Consult the product 
documentation for your wireless adapter for instructions for configuring WPA settings.

To configure WPA or WPA2 in the wireless router:

1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with 

its default user name of admin and default password of password, or using whatever 
password and LAN address you have chosen for the wireless router.

2. Select Wireless Settings from the main menu. 

Note: If you use a wireless computer to configure wireless security settings, you will be 

disconnected when you click Apply. If this happens, reconfigure your wireless 
computer to match the new settings, or access the wireless router from a wired 
computer to make further changes.