Netgear XAV5004 ユーザーズマニュアル

Click OK to reset the device. A message indicates whether or not the operation succeeded.

If you customized your network encryption key, the local Powerline 

device will be disconnected from the network when you reset it to the 
factory default. To avoid this problem, reset all remote devices 
before you reset the local device.

Add a Device to a Powerline Network

If you are adding a device to a Powerline network, and the network encryption key has been 
left at its default setting, all you need to do is plug the new device into a power outlet. 

If the network encryption key has been customized, there are two ways to set the security:

You can use the Security button to add the new device to your network. 

You can use the XAV5004 Powerline Utility to add the new device to the network, as 

described in the following sections. 

The procedure for setting the network encryption key depends on whether the computer 
running the XAV5004 Powerline Utility is connected directly to the new Powerline adapter 
(local) or is connected to a different device in the Powerline network (remote).

Plug the new Powerline adapter into an available AC power outlet. 

Connect the Ethernet cable that came with the adapter to the adapter’s Ethernet port and an 
Ethernet port on the computer.

Start the XAV5004 Powerline Utility, click the Refresh button, and wait for the utility to detect 
the new device.

From the Device Name column select the device.

14).

Set the device’s Security option from the drop-down menu

Click the Apply Security to Selected Devices button.

Click Close.

Verify that the devices in the Powerline network appear in the device list by clicking the 
Refresh button on the Powerline Utility main screen. It may take a minute or two for all 
devices in the network to be detected.