Netgear R6700 ユーザーズマニュアル

The screen adjusts:

The router automatically detects the information in the following fields:

Connection Type. This field indicates the connection type that is detected.

Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the 
length of the prefix, which is also indicated by the underline (_) under the IPv6 
address. If no address is acquired, the field displays Not Available.

Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. If no address is 
acquired, the field displays Not Available.

Select an IP Address Assignment radio button:

Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.

Auto Config. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN).

(Optional) Select the Use This Interface ID check box and specify the interface ID to be 

used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC 
address.

Click the Apply button.

Your settings are saved.



Launch an Internet browser from a computer or wireless device that is connected to the 

network.

Type http://www.routerlogin.net or http://www.routerlogin.com.