Netgear WNDR3300 ユーザーズマニュアル

Safeguarding Your Network

2-5

•

If WEP Authentication is used, circle one: Open System, Shared Key, or Auto. 

–

WEP Encryption Key Size. Choose one: 64-bit or 128-bit. Again, the encryption key 
size must be the same for the wireless adapters and the wireless router.

–

Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption 
keys. Whichever method you use, record the key values in the spaces provided.

•

Passphrase Method. ______________________________ These characters are 
case-sensitive. Enter a word or group of printable characters and click Generate Keys. 
Not all wireless devices support the passphrase method.

•

Manual Method. These values are not case-sensitive. For 64-bit WEP, enter 10 
hexadecimal digits (any combination of 0–9, A–F, or a–f). For 128-bit WEP, enter 26 
hexadecimal digits.

Key 1. ___________________________________ 

Key 2. ___________________________________ 

Key 3. ___________________________________ 

Key 4. ___________________________________ 

•

If WPA-PSK or WPA2-PSK authentication is used:

–

Passphrase. ______________________________ These characters are case-sensitive. 
Enter a word or group of printable characters. When you use WPA-PSK, the other devices 
in the network will not connect unless they are also set to WPA-PSK and are configured 
with the correct passphrase. Similarly, when you use WPA2-PSK, the other devices in the 
network will not connect unless they are also set to WPA2-PSK and are configured with 
the correct passphrase. 

Use the procedures described in the following sections to configure the WNDR3300 router. Store 
this information in a safe place.

This section describes the wireless settings that you can view and configure in the Wireless 
Settings screen, which you access under Setup in the main menu.

Note: If you select Shared Key, the other devices in the network will not connect 

unless they are also set to Shared Key and are configured with the correct key.