Netgear WAG102NA ユーザーズマニュアル

2-1

This chapter describes how to set up your ProSafe 802.11a/g Dual Band Wireless Access Point 
WAG102 for wireless connectivity to your LAN. This basic configuration will enable computers 
with 802.11b or 802.11a/g wireless adapters to do such things as connect to the Internet, or access 
printers and files on your LAN.

You need to prepare these three things before you can establish a connection through your wireless 
access point:

•

A location for the WAG102 that conforms to the 

 below.

•

The wireless access point connected to your LAN through a device such as a hub, switch, 
router, or Cable/DSL gateway. 

•

One or more computers with properly configured 802.11b or 802.11a/g wireless adapters.

Note: Indoors, computers can connect over 802.11b or 802.11a/g wireless networks at 

ranges of several hundred feet or more. This distance can allow for others outside 
your area to access your network. It is important to take appropriate steps to secure 
your network from unauthorized access. The WAG102 Wireless Access Point 
provides highly effective security features which are covered in detail in 

. Deploy the security features 

appropriate to your needs