Netgear WAG102NA ユーザーズマニュアル

Basic Installation and Configuration

2-23

For a new wireless network, print or copy this form and fill in the configuration parameters. For an 
existing wireless network, the person who set up or is responsible for the network will be able to 
provide this information. Be sure to set the Regulatory Domain correctly as the first step.

•

SSID: The Service Set Identification (SSID) identifies the wireless local area network. 
NETGEAR_11a is the default WAG102 SSID. However, you may customize it by using up to 
32 alphanumeric characters. Write your customized SSID on the line below. 

___________________________________

Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter 
card. All wireless nodes in the same network must be configured with the same SSID: 

Circle one: Open System or Shared Key. (Choose Shared Key for more security.)

Note: If you select shared key, the other devices in the network will not connect unless they 
are set to Shared Key as well and have the same keys in the same positions as those in the 
WAG102.

Circle one: 64, 128, or 152 bits. (Enter all four 802.11a keys for the Key Size chosen.)

Key 1: ___________________________________ 

Key 2: ___________________________________ 

Key 3: ___________________________________ 

Key 4: ___________________________________ 

Record the WPA-PSK key. Key: ___________________________________ 

WPA RADIUS Settings. For WPA, record the following settings for the primary and 
secondary RADIUS servers:

Server Name/IP Address: Primary _________________ Secondary __________________ 

Port: ___________________________________ 

Shared Secret: ___________________________________