Netgear WAG102NA ユーザーズマニュアル
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
3-2
Management
v2.0, September 2006
•
Public Community Name: The community string to allow the SNMP manager to read the
wireless access point's MIB objects. The default is Public.
wireless access point's MIB objects. The default is Public.
•
Private Community Name: The community string to allow the SNMP manager to read
and write the wireless access point's MIB objects. The default is Private.
and write the wireless access point's MIB objects. The default is Private.
•
Manager IP address: Enter the IP address of the SNMP manager. If this is set to
255.255.255.255, any SNMP manager will be allowed.
255.255.255.255, any SNMP manager will be allowed.
•
IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent
from the wireless access point. The default is 0.0.0.0.
from the wireless access point. The default is 0.0.0.0.
Using Syslog and Activity Log Information
The Activity Log screen displays the Access Point system activity. It also allows you to enable the
SysLog option if you have a SysLog server on your LAN.
SysLog option if you have a SysLog server on your LAN.
To view the Activity Log and enable a SysLog server:
1. From the main menu of the browser interface, under the Information heading, click the
Available Wireless Station List link to view the list, shown below.
Figure 3-2