Netgear WNDR3700V4 ユーザーズマニュアル
Supplemental Information
109
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object
to press and hold the Restore Factory Settings button on the router for at least 5 seconds.
The router resets, and returns to the factory configuration settings shown in the following
table.
to press and hold the Restore Factory Settings button on the router for at least 5 seconds.
The router resets, and returns to the factory configuration settings shown in the following
table.
Table 2. Factory default settings
Feature
Default behavior
Router login
User login URL
www.routerlogin.com or www.routerlogin.net
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
AutoSensing
Local network
(LAN)
(LAN)
LAN IP address
192.168.1.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time zone
Pacific time
Time zone daylight savings time
Disabled
Allow a registrar to configure this
router
Enabled
DHCP starting IP address
192.168.1.2
DHCP ending IP address
192.168.1.254
DMZ
Disabled
Time zone
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
for NA
Time zone adjusted for daylight
savings time
savings time
Disabled
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled