Netgear 150 プリント
Step 1:
Connect your modem.
Step 2:
Attach stand to the router,
then connect your router.
then connect your router.
Step 3:
Connect your computer.
Step 6:
Configure settings.
Open a browser, such as
Internet Explorer, and enter
Internet Explorer, and enter
www.routerlogin.net
to complete the setup.
Step 5:
Power on your router.
Wait until the power/test
LED turns solid green.
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
(approximately 2 minutes).
Note:
If you have a battery-backed modem,
press the reset button. In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.
need to remove, then re-insert, the battery to recycle
your modem.
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
DSL or Cable
Wireless-N 150 Router
(back)
Modem
Laptop or Desktop
Computer
Wireless-N 150 Router
with Stand
(front)
Package Contents:
Wireless-N 150 Router
WNR612v2
Installation Guide
Power Adapter
Ethernet Cable
Ethernet cable
(not included)
(not included)
Power/Test LED
Wireless LED
Internet LED
LAN Ports 1 & 2 LEDs
Power
Adapter
Adapter
WNR612v2_IG_14Jan10.fm Page 1 Thursday, January 14, 2010 7:31 AM