Multi-Tech Systems MT3410ZLX-T/2 ユーザーズマニュアル
MultiMobile Owner’s Manual
40
No Text Appears on the Screen in Data Mode
C:
The remote modem is not echoing your typed
characters.
characters.
S:
Type
ATE0 then press Enter at the command
line. Then turn the software echo feature on.
C:
Your software may not be set to use Full Duplex
or the remote modem may not be set to use Full
Duplex either.
or the remote modem may not be set to use Full
Duplex either.
C:
The remote modem may be waiting for you to
type a command before it will reply with text.
type a command before it will reply with text.
No Text Appears on the Screen When in
Command Mode
Command Mode
S:
If you can’t see the characters you are typing,
then type
then type
ATE1 then press Enter.
The Modem Does Not Dial a Phone Number After
Execution of AT Dial Command
Execution of AT Dial Command
C:
If you are using touch tone dialing on a phone
line that requires pulse dialing, then it may not
work.
line that requires pulse dialing, then it may not
work.
S:
Use
ATDT in place of ATDP.
Communications Software Dials, but Fails
C:
Make sure the software dialing prefix is
ATDT.
C:
Make sure the software and modem are set to
the same COMx port.
the same COMx port.
C:
The modem may not have hung up the phone
line since the last call.
line since the last call.
S:
Change to Command mode and type
ATH then
press Enter.