Multi-Tech Systems MT3410ZLX-T/2 ユーザーズマニュアル
45
4 - Troubleshooting
Example:
Device=C:\DOS\EMM386.EXE RAM
X=D000-D3FF
Reserve D000 - D3FF for attribute memory.
C:
No free I/O space or interrupt request can be
assigned to the MT3410ZLX.
assigned to the MT3410ZLX.
S:
The MT3410ZLX needs 32 contiguous I/O ports
and one interrupt request for its LAN
connection. It also need 8 contiguous I/O ports
and another interrupt request for Fax/Modem.
The LAN ports must be located at one of the
following I/O addresses: 0x300, 0x320, 0x340,
0x360. The Fax/Modem ports must be located
at one of these addresses: 0x2F8, 0x3E8,
0x3E8. (There are also compatibility issues with
certain Fax/Modem software applications.) We
recommend assigning the Modem Interrupt
(MIR) a value less than 7 (IRQ3 to 6). Make
sure that these resources are available for the
MT3410ZLX.
and one interrupt request for its LAN
connection. It also need 8 contiguous I/O ports
and another interrupt request for Fax/Modem.
The LAN ports must be located at one of the
following I/O addresses: 0x300, 0x320, 0x340,
0x360. The Fax/Modem ports must be located
at one of these addresses: 0x2F8, 0x3E8,
0x3E8. (There are also compatibility issues with
certain Fax/Modem software applications.) We
recommend assigning the Modem Interrupt
(MIR) a value less than 7 (IRQ3 to 6). Make
sure that these resources are available for the
MT3410ZLX.
Enabling The MT3410ZLX
S:
If the Card Service is installed, you can check
by hearing the beep when card insertion.
by hearing the beep when card insertion.
S:
Run CARDEN /CHK to check if the
MT3410ZLX has been enabled. The resources
allocated for the card are shown as below at the
last line of the display message.
MT3410ZLX has been enabled. The resources
allocated for the card are shown as below at the
last line of the display message.
IOP=0Xnnn IRQ=nn COM=nn MIR=nn