Navionics 87043_1 ユーザーズマニュアル

ページ / 54
Chapter 3: Installation
27
Composite source type
Use the supplied cable to connect up to 4 composite source inputs to your E-Series 
Display. The color of each connector defines the video number to which it configures 
within the Video Setup Menu:
• Black - Video 1
• White - Video 2
• Red  -  Video  3
• Green - Video 4
S-Video source type (not supplied)
If you wish to use S-Video source type, you will need to purchase an S-Video cable (Part 
no. E55062). You can connect 2 inputs using S-video to each E-Series Display. The color 
of each connector defines the video number to which it configures within the Video 
Setup Menu:
• Black/White - Video 1/2
• Red/Green - Video 3/4
For further information on setting up your video application, please refer to the Video 
chapter of the Reference Manual.
VGA Out (not supplied)
Use this cable to connect to VGA/SVGA monitor, plasma screen television or M1500 
monitor. Please ensure that any equipment that you connect conforms to the 
following:
            
Note: 
Please refer to  page 4 for details of this accessory.
SeaTalk
2
 (not supplied)
Use this cable to connect to third party equipment or SeaTalk
2
 instruments.
If your system networks two or more E-Series displays, you should ensure that the 
SeaTalk 2 connection is made to the display that you have defined as your master unit.
Note: 
Please refer to  page 4 for details of this accessory.
Display
Resolution
Refresh rate
E120
800 x 600
56 Hz
E80
640 x 480
60 Hz