Enterasys Networks 1G58x-09 ユーザーズマニュアル
Security Configuration Command Set
Configuring 802.1X Authentication
14-29
14.3.2.8 set eapol
Use this command to enable or disable EAPOL port-based user authentication with the RADIUS
server and to set the authentication mode for one or more ports.
server and to set the authentication mode for one or more ports.
set eapol [enable | disable | auth-mode {auto | forced-authorized |
forced-unauthorized} port-string
forced-unauthorized} port-string
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
When enabled, auth-mode defaults to auto.
Command Alternatives (v3.xx.xx and higher)
•
set dot1x (
•
set dot1x auth-config authcontrolled-portcontrol (
)
enable | disable
Enables or disables EAPOL.
auth-mode auto |
forced-
authorized |
forced-
unauthorized
forced-
authorized |
forced-
unauthorized
Specifies the authorization mode as:
•
auto - Auto authorization mode. This is the default mode
and will forward frames according to the authentication
state of the port. For details on this mode, refer to
and will forward frames according to the authentication
state of the port. For details on this mode, refer to
.
•
forced-authorized - Forced authorized mode, which
disables authentication on the port.
disables authentication on the port.
•
forced-unauthorized - Forced unauthorized mode,
which filters and discards all frames received on the port.
which filters and discards all frames received on the port.
port-string
Specifies the port(s) on which to set EAPOL parameters.
For a detailed description of possible port-string values,
refer to
For a detailed description of possible port-string values,
refer to
.