Dynalink RTA1025W ユーザーズマニュアル
ADSL Router User Manual
12
Method Two – Run a silent installation.
n
Copy the USB driver folder from the driver CD to somewhere on the PC. (In
our example, the driver files are put under D:\Askey ADSL USB WHQLed.)
our example, the driver files are put under D:\Askey ADSL USB WHQLed.)
o
Open Start menu, key in cmd in the blank and press enter. Then click cmd.
p
When the Command Prompt screen appears, point to the driver folder on
your PC, and then enter setup -s. Press enter to start silent installation.
your PC, and then enter setup -s. Press enter to start silent installation.
q
The system will install the driver automatically. You can connect your router
and the PC with a USB cable now.
and the PC with a USB cable now.
r
The system will detect the USB driver automatically.
s
After the file copying finished, a completing message will appear.
t
You can use the router now.
Note: If the USB device is not detected, check the USB cable between the
PC and the device. Also make sure that the device is power on.
PC and the device. Also make sure that the device is power on.
1
2