Eicon Networks 2440 ユーザーズマニュアル
Setup
Page 12
Overview
Before you begin, please read the following general installation information.
Connecting to Both Ports
Once you connect a computer to either the USB or Ethernet port, you can connect a second
computer to the unused port without reconfiguring the Diva 2440. However, to help ensure a
problem-free setup, connect only one computer and verify that the device is working correctly
before connecting a second computer.
computer to the unused port without reconfiguring the Diva 2440. However, to help ensure a
problem-free setup, connect only one computer and verify that the device is working correctly
before connecting a second computer.
Requirements
Your system requirements will depend on the type of installation and the computer you are
using.
using.
Ethernet
The Diva 2440 will work with any computer equipped with the
following:
following:
•
A 10BASE-T Ethernet network interface card, properly installed and
configured to use the TCP/IP protocol. Consult the documentation
that came with your card for instructions on how to do this. A
100 Mbps Ethernet card can be used if the card supports
auto-sensing.
configured to use the TCP/IP protocol. Consult the documentation
that came with your card for instructions on how to do this. A
100 Mbps Ethernet card can be used if the card supports
auto-sensing.
•
TCP/IP communications protocol configured to obtain its IP address
automatically (DHCP client), and not configured to use a DNS server.
See
automatically (DHCP client), and not configured to use a DNS server.
See
on page 27 for more information.
USB
To connect using the Diva 2440’s USB port, you will require a
computer running Windows 98, Windows 98 SE, Windows 2000, or
Windows Millennium Edition, equipped with an freeUSB port. You
cannot use the Diva 2440’s USB port with Windows 95, Windows NT,
Apple® Macintosh®, or other systems.
computer running Windows 98, Windows 98 SE, Windows 2000, or
Windows Millennium Edition, equipped with an freeUSB port. You
cannot use the Diva 2440’s USB port with Windows 95, Windows NT,
Apple® Macintosh®, or other systems.
Web Browser
The Diva 2440 is configured via web pages stored on the device. To
use the web interface, you must be using Netscape Navigator 3.01 or
Microsoft® Internet Explorer 4, or later versions. Additionally, your
Web browser must be configured to connect to the Internet via a local
area network (LAN) and not through a proxy server.
use the web interface, you must be using Netscape Navigator 3.01 or
Microsoft® Internet Explorer 4, or later versions. Additionally, your
Web browser must be configured to connect to the Internet via a local
area network (LAN) and not through a proxy server.
An installer for Microsoft Internet Explorer is included on the Diva
CD-ROM for all Windows operating systems except Windows 3.1.
Windows NT® 4.0 requires SP3 or later, available from
www.microsoft.com.
CD-ROM for all Windows operating systems except Windows 3.1.
Windows NT® 4.0 requires SP3 or later, available from
www.microsoft.com.
Diva Assistant
The Diva 2440 includes the Diva Assistant software, compatible with
all Windows operating systems except Windows 3.1. The Diva
Assistant provides convenient utilities and is also very useful during a
LAN setup, but it is not required in order to use the Diva 2440.
all Windows operating systems except Windows 3.1. The Diva
Assistant provides convenient utilities and is also very useful during a
LAN setup, but it is not required in order to use the Diva 2440.