Dynex DX-E401 ユーザーズマニュアル
Setting up the router
7
R
EAR
PANEL
*All ports (both LAN and WAN) are Auto-MDIX. All ports auto-sense cable types
to accommodate straight-through or crossover cable.
Setting up the router
Network settings
To use the router, you must correctly configure the network settings of your
computers. The default IP address of the router is 192.168.0.1, and the default
subnet mask is 255.255.255.0. These addresses can be changed as needed, but
the default values are used in this manual. If the TCP/IP environment of your
computer has not yet been configured, see “Configuring your computers” on page
45, for information.
We recommend that you configure your computers to obtain TCP/IP settings
automatically from the DHCP server feature of the router.
computers. The default IP address of the router is 192.168.0.1, and the default
subnet mask is 255.255.255.0. These addresses can be changed as needed, but
the default values are used in this manual. If the TCP/IP environment of your
computer has not yet been configured, see “Configuring your computers” on page
45, for information.
We recommend that you configure your computers to obtain TCP/IP settings
automatically from the DHCP server feature of the router.
Component
Function
Reset button
Press to restore the router to factory default
settings.
settings.
LAN ports 1-4*
The LED glows steadily when a port is
connected to a network device in your local
area network (LAN.)
connected to a network device in your local
area network (LAN.)
WAN port*
Connect your cable or DSL modem to this
port.
port.
Power connector
Connect one end of the included power
adapter to the power connector and the
other end to a power outlet.
adapter to the power connector and the
other end to a power outlet.
WAN port
LAN ports
Power
connector
connector
Reset button