Foundry Networks AR3201-CL ユーザーズマニュアル
Foundry AR-Series Router User Guide
11 - 6
© 2004 Foundry Networks, Inc.
June 2004
configure router rip interface authentication
This command configures RIP-2 authentication for an interface.
The type of authentication and the key value to be used can be specified, but this is only valid with RIP version 2
(mode 3). When authentication is configured, all subsequent RIP updates contain authentication information. In
addition, all subsequent incoming RIP packets on that interface are accepted only if they carry a valid
authentication header.
(mode 3). When authentication is configured, all subsequent RIP updates contain authentication information. In
addition, all subsequent incoming RIP packets on that interface are accepted only if they carry a valid
authentication header.
Parameter
Description
syntax:
[ no ] authentication auth_type line
example:
Foundry-AR1208/configure/router/rip/interface ethernet1# authentication md5 mymd5keyvalue
This example configures RIP interface Ethernet 1 for MD5 authentication.
related commands:
applicable systems:
All models.
auth_type
The RIP-2 authentication algorithm.
simple
Use simple password authentication.
md5
Use MD5 authentication.
md5_cisco
Use Cisco MD5 compatibility.
line
The RIP-2 authentication password/key
Enter an alphanumeric string of up to a maximum of 16 characters.
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface neighbor
configure router rip interface passive
configure router rip interface split_horizon