iogear GCS1108 ユーザーズマニュアル

OSD Main Screen
When you invoke the OSD, a screen similar 
to the one below appears:

Notes:
1.  The diagram depicts the administrator’s 

main screen. The user main screen does 
not show the F4 and F6 functions, since 
these are reserved for the administrator 
and can’t be accessed by users.

2.  The OSD always starts in list view, with 

the highlight bar at the same position it 
was in the last time it was closed.

3.  Only the ports that have been set 

accessible by the administrator for the 
current logged in user are visible.

4.  If there is a   next to the monitor icon, 

which means that port is attached to 
another KVM (Cascading). Click on a 
switch number, or move the highlight 
bar to it then press the right arrow key 
to expand the list. Similarly, to collapse 
a switch’s port list, click on the switch 
number, or move the highlight bar to it 
then press the left arrow key to collapse 
the list.

OSD Login

One Level Main OSD Screen

Cascading 2nd level screen

Cascading 2nd Main OSD Screen

14

Trigger OSD
Simply press [Scroll Lock] [Scroll Lock] rapidly.

Note: This hotkey sequence can be changed to [Ctrl] [Ctrl] for Mac users. Please refer to 
Hotkey Setting Mode (HSM) section.

OSD Login
By default, the Login and Password are 
blanks, so simply press [Enter] [Enter] to 
login. If you have set a user name and 
password on the KVM, simply enter them 
and press enter to login.